a. Once the fog liquid expires, the fog machine is going to be in the condition of no-liquid working. Users should refill in fog liquid immediately. If there’s no fog liquid refilled within just a few seconds, an enduring buzzer is sounded and also the heating part & pump stop to operate instantly. The alarm buzzer can last 2 minutes and prevent if there’s no liquid refilled in or power reset.
b. Only if fog liquid is refilled in and power reset, can the fog machine work normally.
(a) Condensation around the nozzle from the Fog Machine is typical.
(b) A tiny bit of fog may spray during or after operation.
((c) The Fog Machine must be reheated after lengthy spray. It’ll stop operating for a while until working temperatures are arrived at. During heating-up, fog can’t be created. The Wired Control Indicator Light will switch on once the machine is able to spray fog again.
((d) All fog machines are inclined to clogging because of the consistency of Fog Liquid and it is high vaporizing temperature.
You should cleanup fluid within the Fog Machine when storing to have an long time. This is how:
1. Take away the tank lid. Pour the fog liquid within the fog machine to some container.
2. Keep your fog machine employed by a couple of seconds to operate the fog liquid within the fog machine.
3. It will likely be easier to safeguard the device should you fill just a little fog machine cleaner liquid within the tank, and the fog machine working up until the liquid has go out.
4. Switch them back, unplug the fog machine, and use it a set, dry place.